Anyone ever seen a free spool set-up like the one on the left, for a pre-1917 Meisselbach "Takapart"? The standard mechanism can be seen on the right. Prototype? Lunch box special? It's done clean enough to where it appears to have been done at the factory? Phil? Thanks in advance.
Mark
Unusual Meisselbach Free Spool Mechanism
-
- Advanced Board Poster
- Posts: 482
- Joined: Sun Sep 14, 2003 2:21 pm
- Location: Alpharetta, GA
Re: Unusual Meisselbach Free Spool Mechanism
If you have Phil's second book "More Meisselbach & Meisselbach-Catucci Fishing Reels" on pages 82 and 83 he shows a third version of the mechanism. The loop goes around the clutch mechanism and is attached to the screw on the main gear bridge. The loops encircle the clutch fit in a slot and grip the mechanism by spring tension.
Roger
Roger
-
- Star Board Poster
- Posts: 2578
- Joined: Fri Nov 09, 2012 10:42 am
- Location: S.F. Bay Area ORCA MEMBER
Re: Unusual Meisselbach Free Spool Mechanism
Thanks, Roger. Don't have the second book, but I'm surprised this is the first example I've seen, as I've handled hundreds.
Mark
Mark
Re: Unusual Meisselbach Free Spool Mechanism
I've only had two and got one of each type. I believe the one with the wire clip was made in Newark and the one screwed to the bridge is later and made in Elyria, although I could have that reversed. Will have to check.
-steve
-steve
Re: Unusual Meisselbach Free Spool Mechanism
Meisselbach (and other companies) varied their springs a lot, probably depending on cost/parts availability/inspiration/other factors. Here are two click spring designs in two 1st-model Take-Aparts.
Steve Vernon
ORCA Honorary member
Book: ANTIQUE FISHING REELS, 2nd Ed.
Websites:
Antique Fishing Reels
Kopf reels
Hendrick reels
"Plus ça change, plus c'est la même chose."