Any 14/0 penn rings or bars around
-
- Frequent Board Poster
- Posts: 81
- Joined: Wed Dec 31, 2008 6:51 pm
- Location: Nor Cal
Any 14/0 penn rings or bars around
Thought someone might have one or two here. I have some 1/0 plates to trade. Or ?
Re: Any 14/0 penn rings or bars around
Bud, you can use 16/0 rings if you can find them. 16/0 parts are a little easier to find than 14/0 parts.... can't help you on the posts.
Sid Lehr
- 1badf350
- Advanced Board Poster
- Posts: 309
- Joined: Sun Mar 12, 2017 12:56 pm
- Location: Gaithersburg, Md
Re: Any 14/0 penn rings or bars around
Bud I have some rings. I'll send pics tomorrow. They arent new, but they arent bad.
-Chris
-Chris
-Chris R.
- john elder
- Star Board Poster
- Posts: 8541
- Joined: Mon Sep 22, 2003 2:44 pm
Re: Any 14/0 penn rings or bars around
Bud, if those don't work out, try scottys penn parts. He did have rings for a 16/0 I got. Note the inside and outside rings are not identical, at least on the faceplate side...outside is wider than inside. Thinner ring will work either side but there's a small gap in the side plate groove.
ORCA member since 1999
Honorary Life Member
Specializing in saltwater reels...and fly reels...and oh, yeah, kentucky style reels.....and those tiny little RP reels.....oh, heck...i collect fishing reels!...and fly rods....and lures
Honorary Life Member
Specializing in saltwater reels...and fly reels...and oh, yeah, kentucky style reels.....and those tiny little RP reels.....oh, heck...i collect fishing reels!...and fly rods....and lures
Re: Any 14/0 penn rings or bars around
Pretty sure there are four separate and distinct rings that you have to get, none are interchanageable.john elder wrote:Bud, if those don't work out, try scottys penn parts. He did have rings for a 16/0 I got. Note the inside and outside rings are not identical, at least on the faceplate side...outside is wider than inside. Thinner ring will work either side but there's a small gap in the side plate groove.
Sid Lehr
- RonG
- Super Board Poster
- Posts: 1468
- Joined: Fri Oct 24, 2003 8:49 pm
- Location: Frostproof, FL
- Contact:
Re: Any 14/0 penn rings or bars around
Here's the link to buy Penn Parts that John Elder turned me on to.
https://store.scottsbt.com/PennParts/Conventional.aspx
https://store.scottsbt.com/PennParts/Conventional.aspx
Ron Gast
https://reelsnlures.com
https://reelsnlures.com
- 1badf350
- Advanced Board Poster
- Posts: 309
- Joined: Sun Mar 12, 2017 12:56 pm
- Location: Gaithersburg, Md
Re: Any 14/0 penn rings or bars around
Scotts Penn Parts only has two part numbers. One for outer and one for inner.
-Chris R.
Re: Any 14/0 penn rings or bars around
And I stand corrected. Sorry, I've never had a 16/0 and just assumed the rings would be similar to the smaller model Senators.1badf350 wrote:Scotts Penn Parts only has two part numbers. One for outer and one for inner.
Sid Lehr
- john elder
- Star Board Poster
- Posts: 8541
- Joined: Mon Sep 22, 2003 2:44 pm
Re: Any 14/0 penn rings or bars around
Yeah, re Scotty...and last time I ordered, they only had the narrower ring, so the face plate has a gap in the ring channel.. not really noticeable until you get close, but annoying. As far as I know, lots of these parts are running out from old stock and are not being re-popped.
ORCA member since 1999
Honorary Life Member
Specializing in saltwater reels...and fly reels...and oh, yeah, kentucky style reels.....and those tiny little RP reels.....oh, heck...i collect fishing reels!...and fly rods....and lures
Honorary Life Member
Specializing in saltwater reels...and fly reels...and oh, yeah, kentucky style reels.....and those tiny little RP reels.....oh, heck...i collect fishing reels!...and fly rods....and lures
-
- Frequent Board Poster
- Posts: 81
- Joined: Wed Dec 31, 2008 6:51 pm
- Location: Nor Cal
Re: Any 14/0 penn rings or bars around
Thanks for all the info.