Penn International help..
-
- Big ORCA Fan
- Posts: 20
- Joined: Sat Jul 05, 2014 4:28 pm
Penn International help..
I have been cleaning all of my Internationals and have a question. How are the disk clutch springs supposed to go. There are 4 and every reel I have has been different in arrangement. They are cone shaped and some go away from the bearing, some go towards the bearing, and some are just mixed up facing each other. This is part number 18-30 or if its a 50, 18-50. The manuals aren't clear of the orientation of these springs. Any help would be appreciated, thanks-mike
- john elder
- Star Board Poster
- Posts: 8555
- Joined: Mon Sep 22, 2003 2:44 pm
Re: Penn International help..
Mike, welcome! Here is where you can see an exploded schematic for your reel...just click up the pdf for the schematic on the chart
http://store.scottsbt.com/PennParts/Ree ... _30TW.aspx
Hopefully, you can see the bearing orientation.
http://store.scottsbt.com/PennParts/Ree ... _30TW.aspx
Hopefully, you can see the bearing orientation.
Re: Penn International help..
Originally like this ()()
Never like this )()( and preferably not (())
Never like this )()( and preferably not (())
-
- Big ORCA Fan
- Posts: 20
- Joined: Sat Jul 05, 2014 4:28 pm
Re: Penn International help..
This is exactly the kind of information I wanted to know. Thankyou very much! -mikeDr. Rob wrote:Originally like this ()()
Never like this )()( and preferably not (())