Metal Ferrules

You got 'em, we know how to clean 'em
Post Reply
Andrew K
Big ORCA Fan
Posts: 8
Joined: Thu Jul 23, 2015 4:42 pm
Location: Singapore

Metal Ferrules

Post by Andrew K »

Greetings,
I have a bamboo 3 pc. fly rod which i have not used for a long time.
When i put it togather the ferrules are tight and it will not go in all the
way.I am afraid to force it in.Is there something i could do to make it better?.
P.S...Upon inspection of the ferrules (Male and Female)they look very clean and shiny.
Thanks,
Andrew.
wrong99
Star Board Poster
Posts: 2578
Joined: Fri Nov 09, 2012 10:42 am
Location: S.F. Bay Area ORCA MEMBER

Re: Metal Ferrules

Post by wrong99 »

Clean the inside of the female ferrule with denatured alcohol and a Q-Tip.
Mark
User avatar
john elder
Star Board Poster
Posts: 8541
Joined: Mon Sep 22, 2003 2:44 pm

Re: Metal Ferrules

Post by john elder »

I would recommend that after you follow marks instructions, you put a little bar soap on the Male Ferrule and slowly put it into the female ferrule. pull it back out and re-insert more each time until it will go in all the way and pull out Easily. Go slow and don't force it! I got this tip from rod restorer, Michael Sinclair and have used it successfully on all my rods.

NOTE to Henry: just think it.
ORCA member since 1999
Honorary Life Member

Specializing in saltwater reels...and fly reels...and oh, yeah, kentucky style reels.....and those tiny little RP reels.....oh, heck...i collect fishing reels!...and fly rods....and lures
User avatar
Ron Mc
Star Board Poster
Posts: 3384
Joined: Thu Apr 29, 2004 7:49 am
Location: downtown Bulverde, Texas
Contact:

Re: Metal Ferrules

Post by Ron Mc »

I respect Michael greatly and consider him a friend, but I think metal ferrules should be dry - any film inside tightens the interference fit.
I'm with Mark on denatured alcohol and q-tip.

I use Gulfwax on all my plastic ferrules.
dbummee
Advanced Board Poster
Posts: 155
Joined: Sat Feb 14, 2009 6:21 pm

Re: Metal Ferrules

Post by dbummee »

a slight amount of soap, ivory, works wonders. buffing the male ferrule with some oooo steel wool
will also help. Dna and Q tip on female.
Tom DuRose
User avatar
Ron Mc
Star Board Poster
Posts: 3384
Joined: Thu Apr 29, 2004 7:49 am
Location: downtown Bulverde, Texas
Contact:

Re: Metal Ferrules

Post by Ron Mc »

the problem with using abrasive is potentially over-abrading the male ferrule, which has no recourse.

I have one new 2/2 rod with persnickety ferrules - seems to have a temperature dependence on fit, and I live with it, because I know it will wear in over time.
Andrew K
Big ORCA Fan
Posts: 8
Joined: Thu Jul 23, 2015 4:42 pm
Location: Singapore

Re: Metal Ferrules

Post by Andrew K »

Greetings From Sunny Singapore,
I cleaned the male and female ferrules with Denatured Alcohol.
The fit was abit tight.Then i lubricated the male ferrule with liquid soap
and inserted the male into the female as far as it can go,using very gentle
force.Pulled the rod apart and lubricated the male again and this time it went
in further.I did that about 5 times and on the last attempt the male went it all the
way.Cleaned the ferrules again with Nenatured alcohol and put the rod togather.
The rod fits perfectly and when pulled apart it lets out a loud 'POP' sound.
Thanks for all the help rendered.
Andrew.
Post Reply