E. Vom hofe early drag question
E. Vom hofe early drag question
Hi does anyone know anything about the very early 423 pre 1900 drag system that is only adjustable using a pin? Not while fishing. I am being told that the drag works in both directions but don't see how that can be unless the retrieve is also affected. I don't have the reel in hand. Maybe there is some clutch when linexis pulled out? Thx
Re: E. Vom hofe early drag question
Steve Vernon
ORCA Honorary member
Book: ANTIQUE FISHING REELS, 2nd Ed.
Websites:
Antique Fishing Reels
Kopf reels
Hendrick reels
"Plus ça change, plus c'est la même chose."
Re: E. Vom hofe early drag question
Yes. I can't open the file but I see the patent number at top and that is correct. The patents on reel are 219328 and 271166. I am trying to get seller on phone for clarification but I can't see a drag where increasing tension on drag also increases tension on retrieve. That would not sound right. Thx
Re: E. Vom hofe early drag question
I'm not sure what you mean by this.a drag where increasing tension on drag also increases tension on retrieve
The other patent you mention is Vom Hofe's sliding-button click invention.
Steve Vernon
ORCA Honorary member
Book: ANTIQUE FISHING REELS, 2nd Ed.
Websites:
Antique Fishing Reels
Kopf reels
Hendrick reels
"Plus ça change, plus c'est la même chose."
-
- Frequent Board Poster
- Posts: 35
- Joined: Sun Jan 05, 2020 8:37 pm
Re: E. Vom hofe early drag question
Could the description "the drag works in both directions," mean that the reel can be used either right or left handed?
J.
J.
-
- Super Board Poster
- Posts: 792
- Joined: Mon Dec 14, 2020 1:35 pm
Re: E. Vom hofe early drag question
Curious, is this "drag" for fighting fish, for anti-backlash, or for spool centering/tensioning? Seems the term "drag" gets used to describe all three.
EDIT: Ah, it's a fly reel.
EDIT: Ah, it's a fly reel.
Last edited by Paul Roberts on Thu Apr 22, 2021 9:47 am, edited 1 time in total.
ORCA 2020, 2021, 2022, 2023, 2024
- john elder
- Star Board Poster
- Posts: 8541
- Joined: Mon Sep 22, 2003 2:44 pm
Re: E. Vom hofe early drag question
The early 423's drag was made to make contact with the spool to the degree you set the drag knob and it did not change when letting wind out or reeling it in...drag arms could not rotate. I believe around 1900, they switched to a drag where the drag pads only made contact with the spool when line was going out. When you cranked the handle, the drag arms would rotate about 180 degrees, controlled by a ramped washer (sorry, lousy terminology), and retract away from the spool, thus making retrieve easy.
pinned drag arms:
free wheeling drag...on retrieve, the arms would rotate until contacting that pin with red mark, at which point, the drag pads would be off the spool:
pinned drag arms:
free wheeling drag...on retrieve, the arms would rotate until contacting that pin with red mark, at which point, the drag pads would be off the spool:
ORCA member since 1999
Honorary Life Member
Specializing in saltwater reels...and fly reels...and oh, yeah, kentucky style reels.....and those tiny little RP reels.....oh, heck...i collect fishing reels!...and fly rods....and lures
Honorary Life Member
Specializing in saltwater reels...and fly reels...and oh, yeah, kentucky style reels.....and those tiny little RP reels.....oh, heck...i collect fishing reels!...and fly rods....and lures
Re: E. Vom hofe early drag question
Thx John. The reel is likely pre 1900. Sounds like what I was told about tension being the same in and out as drag is changed is true on this reel. Re patent numbers I just mentioned both to help id the reel and age. Indeed the reel can probably be used in either LHw or RHW. Thx everyone for your posts.
Re: E. Vom hofe early drag question
The break works the same in both directions .
But the handle and handle nut is screwed on the shaft .
They can unscrew if fishing LHW
Johan
But the handle and handle nut is screwed on the shaft .
They can unscrew if fishing LHW
Johan
- john elder
- Star Board Poster
- Posts: 8541
- Joined: Mon Sep 22, 2003 2:44 pm
Re: E. Vom hofe early drag question
Having the keeper nut tightened down on the handle should discourage the handle from unscrewing. However, streams are full of those nuts... best stick to RHW!
ORCA member since 1999
Honorary Life Member
Specializing in saltwater reels...and fly reels...and oh, yeah, kentucky style reels.....and those tiny little RP reels.....oh, heck...i collect fishing reels!...and fly rods....and lures
Honorary Life Member
Specializing in saltwater reels...and fly reels...and oh, yeah, kentucky style reels.....and those tiny little RP reels.....oh, heck...i collect fishing reels!...and fly rods....and lures
Re: E. Vom hofe early drag question
That sequence seems odd to me, as the 1879 patent describes a mechanism entirely dependent on apposed spiral cams for applying drag pressure. So EVH would have ignored his own design for 20 years before adding the cams?I believe around 1900, they switched...
Steve Vernon
ORCA Honorary member
Book: ANTIQUE FISHING REELS, 2nd Ed.
Websites:
Antique Fishing Reels
Kopf reels
Hendrick reels
"Plus ça change, plus c'est la même chose."
Re: E. Vom hofe early drag question
There is spiral cam on the old breaks with pinned break arm to . So that is correct .
- john elder
- Star Board Poster
- Posts: 8541
- Joined: Mon Sep 22, 2003 2:44 pm
Re: E. Vom hofe early drag question
Yep....both have the "spiral cams", which I cleverly described as a "ramp washer"
On the older models, the action of the cam pushes the non-rotating drag arms against the spool as the drag adjustment is tightened. Same happens with the later drag, but the arms swivel to tighten against the spool when line is pulled out and and swivel back to that post on retrieve and away from spool.
On the older models, the action of the cam pushes the non-rotating drag arms against the spool as the drag adjustment is tightened. Same happens with the later drag, but the arms swivel to tighten against the spool when line is pulled out and and swivel back to that post on retrieve and away from spool.
ORCA member since 1999
Honorary Life Member
Specializing in saltwater reels...and fly reels...and oh, yeah, kentucky style reels.....and those tiny little RP reels.....oh, heck...i collect fishing reels!...and fly rods....and lures
Honorary Life Member
Specializing in saltwater reels...and fly reels...and oh, yeah, kentucky style reels.....and those tiny little RP reels.....oh, heck...i collect fishing reels!...and fly rods....and lures
Re: E. Vom hofe early drag question
"Spiral cam" is based on EVH's immortal words in the patent. "Ramp washer" works just as well.
Steve Vernon
ORCA Honorary member
Book: ANTIQUE FISHING REELS, 2nd Ed.
Websites:
Antique Fishing Reels
Kopf reels
Hendrick reels
"Plus ça change, plus c'est la même chose."
- RonG
- Super Board Poster
- Posts: 1468
- Joined: Fri Oct 24, 2003 8:49 pm
- Location: Frostproof, FL
- Contact:
Re: E. Vom hofe early drag question
Here's some more photos of the EVH 1879 drag patent. The brake pads move in and out based on how much you turn the drag knob. Drag action is independent of which retrieve direction you use.
Ron Gast
https://reelsnlures.com
https://reelsnlures.com
Re: E. Vom hofe early drag question
Great pics Ron . You can easy see the spiral cam on one of them .