DAM Quick Factory Parts & Service Manual
-
- Advanced Board Poster
- Posts: 164
- Joined: Tue Aug 17, 2004 11:37 am
- Location: Rio Vista, California
DAM Quick Factory Parts & Service Manual
I have made 6 copies of the DAM Quick factory parts and service manual that were effective July 1, 1979. I am asking $7.95 each including postage to any address in the USA. Overseas buyers pay the actual cost of mailing.
The manual consists of 32 pages reproduced in black and white on 24 Lb. paper stock, of the names of the parts, exploded views of the reels, schematics, numbers and prices for the parts at that time. The following is a list of the reels covered in this manual.
Note: Many Quick parts are interchangeable and are used in more than one model. These parts carry the same number, i.e., part number 100-016 is used or models 110, 220, 270, 285, 330, 440, 550, 110N, 220N, 330N, 331N, 441N, and 550N.
Models covered: 101, 103, 110,220, 240, 250, 265, 270, 280, 285, 330 440, 550, 1000, 1400, 5000, International 10, 20, 30, 40, SL1, SL2, SL3, SL4, SL5, SLS 0, SLS 1, SLS 2, SLS 3, SLS 4, SLS 5, Champion Bait Casting Series: 700, 700B 800, 800B
Your personal check or a money order is always welcome. If you chose to use a credit card, we gladly accept payments through Pay Pal. Thank you.
Ed
The manual consists of 32 pages reproduced in black and white on 24 Lb. paper stock, of the names of the parts, exploded views of the reels, schematics, numbers and prices for the parts at that time. The following is a list of the reels covered in this manual.
Note: Many Quick parts are interchangeable and are used in more than one model. These parts carry the same number, i.e., part number 100-016 is used or models 110, 220, 270, 285, 330, 440, 550, 110N, 220N, 330N, 331N, 441N, and 550N.
Models covered: 101, 103, 110,220, 240, 250, 265, 270, 280, 285, 330 440, 550, 1000, 1400, 5000, International 10, 20, 30, 40, SL1, SL2, SL3, SL4, SL5, SLS 0, SLS 1, SLS 2, SLS 3, SLS 4, SLS 5, Champion Bait Casting Series: 700, 700B 800, 800B
Your personal check or a money order is always welcome. If you chose to use a credit card, we gladly accept payments through Pay Pal. Thank you.
Ed
Dam Quick Manuals
Ed,
I'll take one. Just let me know how much for shipping to Iowa. I would like to make payment to you by credit card through PayPal. Thanks! Randy Heller
I'll take one. Just let me know how much for shipping to Iowa. I would like to make payment to you by credit card through PayPal. Thanks! Randy Heller
-
- Advanced Board Poster
- Posts: 164
- Joined: Tue Aug 17, 2004 11:37 am
- Location: Rio Vista, California
Dam Quick Parts & Service Manuals
Hi Randy,
The cost, $7.95, for a copy of the DAM Quick factory publication includes the handling and shipping.
Thank you,
Ed Barrett
353 Glenn Lakes Drive
Rio Vista, CA 94571
The cost, $7.95, for a copy of the DAM Quick factory publication includes the handling and shipping.
Thank you,
Ed Barrett
353 Glenn Lakes Drive
Rio Vista, CA 94571
Re: DAM Quick Factory Parts & Service Manual
Do you still have these manuals Larry
Re: DAM Quick Factory Parts & Service Manual
Ed do you have any more manuals? I would be interested in one, and pay you using PayPal.
Thanks Mike Randol
Thanks Mike Randol
Re: DAM Quick Factory Parts & Service Manual
Slim, unfortunately, Ed passed away not too long after this posting.
Aloha
Brian F.
_________
ORCA Member 1997
Got a spare reel stamped "Pflueger" or a Montague Imperial?
"Caution, objects in reel view mirror are older than they appear."
Brian F.
_________
ORCA Member 1997
Got a spare reel stamped "Pflueger" or a Montague Imperial?
"Caution, objects in reel view mirror are older than they appear."
Re: DAM Quick Factory Parts & Service Manual
Thank you for telling me. My sympathy to the family. I am new to Orca.
- Paul M
- Ultra Board Poster
- Posts: 2200
- Joined: Fri Feb 03, 2006 9:10 pm
- Location: Toronto, Canada
- Contact:
Re: DAM Quick Factory Parts & Service Manual
Slim,
Have you looked in the schematics section of the ORCA library? Here is a link to the relevant cover page.
D.A.M. schematics.
Merry Christmas!
Have you looked in the schematics section of the ORCA library? Here is a link to the relevant cover page.
D.A.M. schematics.
Merry Christmas!
Paul Manuel
Member since 2006
Member since 2006
Re: DAM Quick Factory Parts & Service Manual
Hi Paul,
I went to the D.A.M. Schematics, but it would not let me open any of them. Do you have any idea what I’m doing wrong?
Thanks Slim
I went to the D.A.M. Schematics, but it would not let me open any of them. Do you have any idea what I’m doing wrong?
Thanks Slim
Re: DAM Quick Factory Parts & Service Manual
Paul, I apologize I must have a one track mind. Wish you and your family a very Merry Christmas and a Happy & Healthy New Year.
Slim
Slim
- Paul M
- Ultra Board Poster
- Posts: 2200
- Joined: Fri Feb 03, 2006 9:10 pm
- Location: Toronto, Canada
- Contact:
Re: DAM Quick Factory Parts & Service Manual
Slim:
The online ORCA library is a self-serve benefit for ORCA members. You have to buy an ORCA membership and then set up a store account in order to download files of interest. ORCA membership gets you a subscription to the Reel News and other member benefits like the library access and annual convention privileges. It's worth every penny if you like old reels. Look here for info on New ORCA Membership and setting up an online ORCA Store account. Joining mid-season gets you recent back issues of the Reel news.
Merry Christmas!
The online ORCA library is a self-serve benefit for ORCA members. You have to buy an ORCA membership and then set up a store account in order to download files of interest. ORCA membership gets you a subscription to the Reel News and other member benefits like the library access and annual convention privileges. It's worth every penny if you like old reels. Look here for info on New ORCA Membership and setting up an online ORCA Store account. Joining mid-season gets you recent back issues of the Reel news.
Merry Christmas!
Paul Manuel
Member since 2006
Member since 2006