hi at all,i search guide line for vintage reel pflueger automatic 778 prototyp.
thank you and have a goods days.
regards,fred
pflueger 778 prototyp
- Rick H
- Ultra Board Poster
- Posts: 1562
- Joined: Wed Oct 29, 2008 9:23 pm
- Location: Hilliard, Fl.
- Contact:
flylutz...Maybe this will help. Bill Land did a write-up on the 2008 Convention, which identifies a Model 778 Prototype. See the following link, the reel you ask about is the 3rd from the bottom on this page...
I guessing that you need the Bent wire swiveling "line guide" for one of these reels?
http://orcaonline.org/shakes_archives.htm
I guessing that you need the Bent wire swiveling "line guide" for one of these reels?
http://orcaonline.org/shakes_archives.htm
-
- Ultra Board Poster
- Posts: 2313
- Joined: Sat Sep 13, 2003 11:06 pm
- Location: On the Snake River or Lake Lowell
- Contact:
Hey Rick. I worked hard taking those photos and doing that writeup. And it wasn't 2008. It was not a well attended event, for the convention was the day after 9/11/2001Rick H (AutoFly) wrote:flylutz...Maybe this will help. Bill Land did a write-up on the 2008 Convention, which identifies a Model 778 Prototype. See the following link, the reel you ask about is the 3rd from the bottom on this page...
I guessing that you need the Bent wire swiveling "line guide" for one of these reels?
http://orcaonline.org/shakes_archives.htm
-
- Ultra Board Poster
- Posts: 2313
- Joined: Sat Sep 13, 2003 11:06 pm
- Location: On the Snake River or Lake Lowell
- Contact: