I just purchased and received my second project. I am pretty sure it is a DAM Quick 110N. The issue is the AR was not working. When I got the reel the AR lever was separate from the reel. I disassembled the reel and found some pieces in the upper assembly but don't know if I have all the parts, and if I do how to reassemble. Is there a place to find a schematic or a video on how to repair the AR on this reel? Below is a pic of what I found when I opened up the reel.
DAM Quick 110N I believe
Re: DAM Quick 110N I believe
Well I figured out the problem. I got the reel off of ebay and it said the AR was not working. Whoever opened it up previously had the dog in backwards. I am going to look for a replacement spring and dog because neither are in good shape, but it is working now. Two reels purchased and 2 reels back in service. I think I like this new hobby.
- Midway Tommy D
- Star Board Poster
- Posts: 3135
- Joined: Sun Jan 20, 2013 11:23 pm
- Location: Eastern NE
Re: DAM Quick 110N I believe
Looks like you have all the parts. The U clip looks to be complete with a good spring post. The spring appears to have one end loop broken and the center portion could use some reconfiguration. You may be able to bend a new loop on the end if it actually is broken, or you may be able to find a suitable replacement at the hardware store (maybe Ace). The dawg looks to be fairly worn on the end. You can file the roundedness to be crisp but once you get that part filed you may have to file/adjust the curve a little so that the dawg catches the stop correctly on the rotor. It's really not a difficult adjustment, just file sparingly. Someone probably took it apart because it is worn and wasn't catching.
If you click on the thumbnails they'll enlarge.
Here's what a new dawg looks like:
Here's the completed configuration:
If you click on the thumbnails they'll enlarge.
Here's what a new dawg looks like:
Here's the completed configuration:
Love those Open Face Spinning Reels! (Especially ABU & ABU/Zebco)
Tom DeLong, NE
ORCA Member - 2027
Tom DeLong, NE
ORCA Member - 2027
- RonG
- Super Board Poster
- Posts: 1468
- Joined: Fri Oct 24, 2003 8:49 pm
- Location: Frostproof, FL
- Contact:
Re: DAM Quick 110N I believe
Hey Tom,
You're the man when it comes to knowledge about open face spinning reels.
You're the man when it comes to knowledge about open face spinning reels.
Ron Gast
https://reelsnlures.com
https://reelsnlures.com
- Midway Tommy D
- Star Board Poster
- Posts: 3135
- Joined: Sun Jan 20, 2013 11:23 pm
- Location: Eastern NE
Re: DAM Quick 110N I believe
Thank you, Ron! I'm still learning, every day brings a new adventure.
Love those Open Face Spinning Reels! (Especially ABU & ABU/Zebco)
Tom DeLong, NE
ORCA Member - 2027
Tom DeLong, NE
ORCA Member - 2027
Re: DAM Quick 110N I believe
Thanx for the information Tommy. Do you happen to know if a 220N dawg would fit the 110N?
- Midway Tommy D
- Star Board Poster
- Posts: 3135
- Joined: Sun Jan 20, 2013 11:23 pm
- Location: Eastern NE
Re: DAM Quick 110N I believe
Yes, it will.
Here's the "N" Schematic:
And here's the corresponding parts list:
Click on the thumbnails and they'll enlarge. Click on the enlargement and it will enlarge some more.
Love those Open Face Spinning Reels! (Especially ABU & ABU/Zebco)
Tom DeLong, NE
ORCA Member - 2027
Tom DeLong, NE
ORCA Member - 2027