ocean city handle knob not spinning freely, HOW TO FIX?

You got 'em, we know how to clean 'em
Post Reply
sea ghost
Frequent Board Poster
Posts: 81
Joined: Tue Jul 14, 2020 11:38 pm

ocean city handle knob not spinning freely, HOW TO FIX?

Post by sea ghost »


OCEAN CITY "Seattle" N0.110 REEL
ocean city handle knob not spinning freely, HOW TO FIX?

could use some advice here, :bash:

thanx,
sea ghost :bash:
Last edited by sea ghost on Mon Apr 10, 2023 12:32 am, edited 3 times in total.
User avatar
Paul M
Ultra Board Poster
Posts: 2203
Joined: Fri Feb 03, 2006 9:10 pm
Location: Toronto, Canada
Contact:

Re: ocean city handle knob not spinning freely, HOW TO FIX?

Post by Paul M »

A picture or model name/number might help.
Paul Manuel

Member since 2006
User avatar
john elder
Star Board Poster
Posts: 8634
Joined: Mon Sep 22, 2003 2:44 pm

Re: ocean city handle knob not spinning freely, HOW TO FIX?

Post by john elder »

What Paul said… but about any plastic grasp will respond to hot water. Try running it under a hot water tap for a minute, then try to turn. If it turns freely, shoot some light oil or WD-40 into whatever gap you can find and turn to work the oil in around the post. That might be all you need.
ORCA member since 1999
Honorary Life Member

Specializing in saltwater reels...and fly reels...and oh, yeah, kentucky style reels.....and those tiny little RP reels.....oh, heck...i collect fishing reels!...and fly rods....and lures
sea ghost
Frequent Board Poster
Posts: 81
Joined: Tue Jul 14, 2020 11:38 pm

Re: ocean city handle knob not spinning freely, HOW TO FIX?

Post by sea ghost »

When I RAN HOT WATER ON THE KNOB IT SPINS FREELY BUT AFTER I COOLS DOWN I T GET STIFF AGAIN,

I EVEN UP PUT THE REEL ON A ROD AND TESTED IT........STILL THE KNOB IS TOO STIFF,

I AM 100% THIS IS THE ORIGINAL HANDLE AND KNOB ON THE REEL.

ANY OTHER TRICKS OF THE TRADE THAT MIGHT FIX THIS ISSUE?

I AM WIDE OPEN TO ANYONES ADVISE

THANX
sea ghost
Last edited by sea ghost on Fri Jan 19, 2024 8:27 pm, edited 1 time in total.
User avatar
54bullseye
Super Board Poster
Posts: 535
Joined: Sun Dec 14, 2014 11:47 am

Re: ocean city handle knob not spinning freely, HOW TO FIX?

Post by 54bullseye »

I have run into same thing with the bigger Ocean City reels. The big reels have a nut that holds knob onto the handle and I take knob and it's shaft off .Then gently tap shaft out of knob pushing the splined grease or oil fitting out of the end of the knob. Then you can take a slightly over sized drill and open hole in plastic open just a bit then reassemble and very easily tap oil fitting back in. It works perfectly on the big OC reels with the nuts. Unfortunately it looks like your shaft has no nut and it's peened on ????

I tried hot water, light oil and none worked long term. Maybe look for a cheap donner reel or replacement handle on eBay ??? Good Luck ! John Taylor
Reelman2
Advanced Board Poster
Posts: 322
Joined: Sun Jan 01, 2006 5:00 pm
Location: Deland, Florida

Re: ocean city handle knob not spinning freely, HOW TO FIX?

Post by Reelman2 »

Graphite. I don't know if it would work or not but after you get the handle loose and it has dried thoroughly you might try squirting some powdered graphite in it. Let me know if it works.
Collect mostly Ky style reels; Meek, Heddon, Horton, Pflueger Redifor and Worth, etc.

ORCA Member
sea ghost
Frequent Board Poster
Posts: 81
Joined: Tue Jul 14, 2020 11:38 pm

Re: ocean city handle knob not spinning freely, HOW TO FIX?

Post by sea ghost »

THANK YOU TO ALL WHO PUT YOUR REPAIR ADVISE HERE :type: .......IT WAS VERY HELPFUL, :bow:

THE KNOB SEEMS TO WORKING FINE NOW FROM THE HOT WATER AND LIGHT OIL TREATMENT, long term will be the real test,

BEST REGARDS,
Sea Ghost :D
Post Reply